LEDMESEE

GUIDE · USING YOUR FRAME

Slide the poster out. Slide the next offer in.

A new campaign needs a new print. The slide-in mechanism lets you change graphics without unscrewing the casing.

A PRINT YOU CHANGE BY HAND

Pull out the poster. Slide in your next offer.

A physical print sits behind the front. Slide it out through the slot and insert a new graphic. No tools — the frame and its front stay in place.

  1. 01Slide the current print out
  2. 02Slide in a new backlit poster
  3. 03Show your next offer
How LEDMESEE works
The print movesThe glass stays in place

Interactive slide-in diagram. Slot position and access depend on the model and installation.

01

Prepare the right print

Check the frame model and current poster dimensions. The new print needs the right format and material. Lay it on a clean, flat surface. Avoid folds and dirt that might show under backlighting.

02

Keep the slot accessible

In the model shown, the graphic comes out at the top. Check that there is enough room above the frame to remove the whole poster. Do not block access with shelving or fitted furniture. For a suspended display, ensure safe, convenient access first.

03

1. Slide the current poster out

Hold the print at the edge of the slot and slide it out evenly. Lay the graphic flat if you want to reuse it. Do not prise up the glass front or try to force the sides of the casing apart.

04

2. Slide the new graphic in

Orient the new poster correctly. Insert its edge into the slot and guide the print evenly until properly seated. If you feel resistance, stop and check alignment and fit; do not force it.

05

3. See the finished result

Check that the graphic is straight and no corner has folded. View it from the customer’s position with the light on. In a double-sided frame, you can also change the second print independently.

06

A planned change is easier

Label posters by campaign and format. Store them flat. This helps your team select the right print quickly, without finding dimensions or choosing a frame again for the next change.

YOUR VENUE. YOUR DESIGN.

Show us your location.

An interior photograph and brief offer description are enough to start. We will help choose the model, format and print for what the customer should see.

Let’s discuss your project

What next? Three simple steps.

  1. Choose the location and format: measure the space and judge from what distance customers will see the poster.
  2. Order a frame and backlit print at shop.ledmesee.com or send a photo of the space to office@ledmesee.com.
  3. Hang or stand the frame, connect the power and slide in the poster. You change the next graphic in seconds.

FOR ADVERTISING AGENCIES

Sell frames and earn on every poster change.

Join the LEDMESEE partner programme: attractive agency pricing and 30% off to start. We are looking for partners worldwide.

Become a partner

Choose language

Choose the site language. You can change it at any time.

PLPolskiENEnglishDEDeutschFRFrançaisESEspañolITItalianoNLNederlandsPTPortuguêsCSČeštinaSKSlovenčinaDADanskSVSvenskaFISuomiELΕλληνικάHUMagyarRORomânăBGБългарскиHRHrvatskiSLSlovenščinaETEestiLTLietuviųLVLatviešuMTMaltiGAGaeilgeNONorskJA日本語ARالعربية

LEDMESEE up close

AI visualisations based on the product. They are not backlighting measurements or actual footage of a customer installation.